Norton Bevel Systems: A well rounded solution

Norton launches a new variety of machines and accessories for making bevelling and rounding metal a piece of cake! 

The new additions to Norton’s metal fabrication solutions are the NorBevel-6 and NorBevel-12. The new range are compact and ergonomic, with pneumatic and electric varieties to make bevelling and rounding metal easier, faster, more accurate and more cost effective.
The NorBevel, can bevel up to a depth of 12mm and the concept has been designed for heavy-duty bevelling and radius work. Norton offers a ‘good’ and ‘best’ machine performance solution as well as cutting heads for all metal types to meet every demand in every application.
How can the Norton Norbevel benefit me in my bevelling operations?
BETTER WORKING CONDITIONS
Lightweight and almost vibration-free, chips are large enough to immediately drop to the ground. No hazardous dust particles and/or combustion gases are released.
A MORE CONSISTENT AND ACCURATE ANGLE
NorBevel-6 and NorBevel-12 machines cut in a more consistent and accurate angle to the metal for a stronger welded joint.
A MACHINE QUALITY FINISH WITHOUT CONTAMINATION
A better quality weld joint is created through reduced encapsulation of impurities in the weld, as NorBevel does not contaminate the metal.
SPEED AND FLEXIBILITY 
Approximately 1.2m of bevelling can be done in one minute. In a matter of seconds the machine can be adjusted and the bevel heads replaced.
NO FINISHING AND NO DISCOLORATION 
A perfect end result straight away, without finishing. Discoloration is prevented through reduced-sparking that adds hardly any heat to the material.
How can Norton Norbevel benefit me in my rounding operations?
UNIFORM QUALITY 
A larger bonding surface is created for paint and coatings due to the uniform radius. Cable feed glands are no longer required to prevent chafing when feeding through cables, wiring and/or piping.
A QUALITY FINISH
Only with NorBevel you can quickly achieve high levels of constant quality when rounding metal.
SPEED AND FLEXIBILITY
Rounding small openings from a diameter of 18 mm is easy due to the compact and lightweight machine design. Rounding metal now has an unprecedented degree of flexibility.