Frequently Asked Questions - Floor Sanding

 

When sanding wood floors, how do I improve the area where the edger and drum sander meet?
The drum/belt sander does not reach the edges of the wood floor I'm sanding. What do I do?
If a wooden floor is uneven, cupped, or crowned, should I sand it differently?
What grit of sandpaper sheets or rolls is optimum for sanding?
I use screens to abrade between coats. How is the SandDollar more effective?
Why should I switch from maroon pads and PSA strips to the SandDollar?
What advantages does SandDollar offer compared to PSA strips on a maroon pad?
Does Norton have a clean-release masking tape?
Micro-Fiber Mop Kit tips.
Any tips for using Micro-Fiber products?
Do you have any tips for Between Coats sanding?
Any tips for buffing on stain?
Any tips for using screen discs on floor buffer machines?
What are Universal Vacuum Hole (UVH) orbital edger discs used for?
Why would I use screen floor edger discs instead of paper?
Why would I use a screen driver pad with double-sided floor sanding discs?
Why would I use a screen driver pad with double-sided floor sanding discs?
Why would I use double-sided discs instead of standard single-sided floor sanding discs?
Why is Norton Red Heat better for sanding off old floor coatings?
What’s the easiest way to mount floor sanding sheets or covers?
Any tips for minimizing loading when drum sanding?
Can I edge floors with a belt sander?
What is FastTrack Service?
What belt grit order should I use for sanding pre-finished floors?