Norton Ceramic Technology
Ceramic Products for the Bodyshop Repair market.
Norton’s ceramic technology is formed of a unique ceramic structure ensuring a fast and immediate stripping process that will guarantee a time saving solution and ensuring quality for your next development.
This new ceramic technology significantly improves the results and has a greater impact for your projects. As the ceramic structure is sharper than aluminium oxide, the abrasive doesn’t have to work as hard resulting in more cuts with the same disc and faster consistent cut rates.
There is better longevity in these abrasive ceramics (as the grains are fractured rather than rounded edged), the abrasive stays sharp, allowing less disc changes saving you time and money. Using this advanced ceramic technology will therefore reduce labour costs per job through less sanding time and more material removal.
Sharper grain provides faster cutting and removal rate saving time
Grain structure lasts up to three times longer than Aluminium Oxide*
Consistent cut for a better finish due to continuous sharp edges
*Tests carried out by SGA
Differences Between Aluminium Oxide and Ceramic Grains
Ceramic Grain
Whereas with the ceramic grain as it continually breaks, it leaves a continuous sharp edge aiding cut rate and finish while lasting longer than aluminium oxide products.
Aluminium Oxide Grain
As it wears down it becomes blunt, resulting it to wear out quicker and the cut rates being significantly reduced.
Select your application to choose a product with ceramic grain:
A host of products designed to reduce process times by providing faster cut rates and longer working performance. Can be used for:
- rust removal
- paint removal
- cleaning
- removing weld points
- blending
- removing breaking edges
- removing parting lines and machine marks
These versatile products can be used for working mild and detailed contoured areas as well as flat surfaces. Suitable for use with pneumatic tools.
| DEBURRING, STRIPPING & CLEANING DISCS | FILE BELTS |
|---|---|
| 
|
Manual sanding sheets made using the highest standard abrasive manufacturing technology. Specially designed for dry sanding operations, perfect for applications such as:
- sanding old paint, primer and filler
- deburring
- removing scratches
- finishing plastic filler
- feather-edging repaired areas
| MULTI AIR CUT SHEETS | |
|
Sanding sheets for use with pneumatic sanding machines made using the highest standard abrasive manufacturing technology. Multiple hole options make for the best operation possible for dust extraction solutions, perfect for applications such as:
- sanding old paint, primer and filler
- deburring
- removing scratches
- finishing plastic filler
- feather-edging repaired areas
| NORTON PRO PLUS A975 DISCS | NORTON MULTI-AIR CYCLONIC DISCS |
|---|---|
| 
|
Pre-cut sheets ideal for fine sanding on round edges, contours and curves, providing an outstanding finish on primers and top coats. Pre-cut sheets make it easier to tear with one hand, and prevent scratches due to an uneven edge.
| NORTON PRO PLUS FOAM ROLLS | |
 |
