How to start the Norton Clipper CFP 13W Compactor Engine

How to start the Norton Clipper CFP 13W Compactor Engine

Discover how to start your Norton Clipper compactor engine by following these easy steps:
1 - Turn the fuel valve to the ON position. Fully press the dead-man handle against the main handle.
2- Move the choke lever to the CLOSED position.
NOTE: do not use the choke if the engine is warm or the air temperature is high.
3 - Move the throttle control lever slightly to the left.  Put the engine switch on ON.
4 - Pull the starter grip lightly until you feel resistance, then pull briskly.
CAUTION: Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter.
5 - As the engine warms up, gradually move the choke lever to the OPEN position. Position the throttle control lever for the maximum engine speed.
This product may not be available in all countries, please contact us
If you liked this video, visit the Norton Abrasives EMEA YouTube channel and hit 'like' and 'subscribe' to keep up to date with more videos and advice from our Norton Clipper experts.