Norton Toolroom Non-Reinforced Cut-off Wheel - Type 01

Better

Norton R30 57A Type 41 Non-Reinforced Cut-Off Wheel

Use this R30 57A AO Type 01/41 non-reinforced toolroom cut-off wheel with your fixed-based chop saw or chop stroke machine where your work is securely clamped for safety. This cut-off wheel is an excellent choice for cutting 300 and 400 series stainless steel and other hard and soft carbon steels, as well as titanium, super alloys, soft metals, and gray, cast and ductile irons. Its mild-acting R30 bond is particularly useful for making wet, ultra-thin cuts. Rely on this wheel's tough aluminum oxide grain for your toolroom cut-off applications.

Abrasive AO

Wheel Type Type 01/41

Features and benefits

Tough, durable and versatile aluminum oxide grain for toolroom cut-off applications

R30 bond is a mild acting rubber bond, primarily for wet, ultra-thin cutting

Better choice for cutting-including 300 and 400 series stainless, hard and soft carbon steels, tool steels, titanium, super alloys, soft metals (aluminum, brass, bronze, copper), and cast, ductile and gray iron

This wheel is zone reinforced around the center hole only so considered non-reinforced; it must be used on a fixed-base machine where work is securely clamped

Customise columns

Product SpecsDownload as CSV

Diameter	Arbor Hole	Thickness	Grit Size	Sanding Grade	Inventory Type	Max Operating Speed	External Spec	Abrasive	Wheel Type	Part Number
6 in	1-1/4 in	.020 in	90 Grit	Fine	Stock	6370	57A90-R0R30	Aluminum Oxide	Type 01/41	66252822954
6 in	1-1/4 in	.015 in	90 Grit	Fine	Stock	6370	57A90-R0R30	Aluminum Oxide	Type 01/41	66252822953